PSR-SPP- 24DC/ESD/5X1/1X2/T10S

https://www.phoenixcontact.com/gb/products/2981509 Safety relays - PSR-SPP- 24DC/ESD/5X1/1X2/T10S - 2981509 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 10.0 s, pluggable Push-in terminal block The figure shows a version of the product Your advantages  Up to Cat. 4/PL e according to ISO 13849-1, SILCL 3 according to IEC 62061, SIL 3 according to IEC 61508 for undelayed contacts  Up to Cat. 3/PL d according to ISO 13849-1, SILCL 2 for delayed contacts  For emergency stop and safety door monitoring, plus evaluation of light grids  Fixed delay times of 10 s  3 undelayed and 2 dropout delay contacts  Single and two-channel control  Time saving push-in connection, tools not required  Potentials can be easily looped through – ideal for BUS applications  Intuitive use through colour coded actuation lever  Can be combined with the MSTB 2,5 range  Quick and convenient testing using integrated test option Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918981105 Weight per Piece (excluding packing) 445.000 g Custom tariff number 85371098 Country of origin Germany Technical data Note 12/30/2019   Page 1 / 7 https://www.phoenixcontact.com/gb/products/2981509 Safety relays - PSR-SPP- 24DC/ESD/5X1/1X2/T10S - 2981509 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 45 mm Height 112 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 55 °C (observe derating) Ambient temperature (storage/transport) -40 °C ... 70 °C Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing) Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing) Maximum altitude ≤ 2000 m (Above sea level) Input data Rated control circuit supply voltage US 24 V DC -15 % / +10 % Rated control supply current IS typ. 150 mA Power consumption at US typ. 3.6 W Inrush current 200 mA (at US) < 40 mA (with Us/Ix to S10) < 150 mA (with Us/Ix to S12) > -60 mA (with Us/Ix to S22) < 40 mA (with Us/Ix to S34) < 40 mA (with Us/Ix to S35) Current consumption < 40 mA (with Us/Ix to S10) < 40 mA (with Us/Ix to S12) > -40 mA (with Us/Ix to S22) 0 mA (with Us/Ix to S34) < 5 mA (with Us/Ix to S35) Voltage at input/start and feedback circuit 24 V DC -15 % / +10 % Typical response time < 600 ms (automatic start) < 70 ms (manual start) Typ. starting time with Us < 600 ms (when controlled via A1) Typical release time < 20 ms (when controlled via S11/S12 and S21/S22) < 20 ms (when controlled via A1) Concurrence input 1/2 ∞ Recovery time